Industrial Waste Oil Centrifuge Separator Machine For Fuel Oil Treatment Plants

Industrial Waste Oil Centrifuge Separator Machine For Fuel Oil Treatment Plants

• 1. INTRODUCTION
• The slotted-tube filter elements with filtration rates of 50 to1,000 ∪m ensure highly effective separation of contaminating particles from the process medium.
• Automatic cleaning starts as soon as the elements become contaminated. The filtrate flow is not interrupted during the back-flushing procedure.
• A range of filters of different sizes allows flow rates of up to 1000 m³ per hour.
• Numerous combinations of materials and equipment as well as individually adjustable control parameters allow optimum adaptation of the filter to any application.

2. APPLICATION

Power stations

To reduce the impurities content and water insider of light fuel oil , diesel oil ,lube oil ,heavy fuel oil etc

• District heat supply
  Protecting heat exchangers from clogging and wear.
• Vessel industry
  Improving and protection of power of the diesel engine generator set by filtering process
• Sewage treatment plants
  During production of industrial water, filtration of a take-off of the clear run can be used to save valuable drinking or well water.
• Environmental technology
  Back-flushing filters are used as pre-filters before waste-water treatment plants (UV treatment, reverse osmosis, membrane filtration...).
• Mining
  By filtering underground, spray water of an even quality is assured. This results in more reliable operation of pumps and disc-cutting machines.

• One of the primary applications of industrial centrifuges are as diesel centrifuge or fuel polishing centrifuge for Diesel Fuel and Heavier Fuel Oils. In-fact Dolphin Centrifuges started as Dolphin Marine when is was exclusively catering to the marine centrifuge market. Dolphin has supplied centrifuges for:

• Marine or #2 Diesel or MDO or Gas Oil Polishing
• Fuel Oil or HFO or Bunker Fuel Purification
• Lube Oil Purification / Engine Oil Purification
• Diesel Oil Separator

• Centrifuge capacities from 2 to 60+ Gallons/min are used based on the specific application and type of fuel/oil. Dolphin centrifuge has all available capacity centrifuges in stock ready for quick turn-around and delivery.

  Diesel fuel and lube oil are routinely contaminated by water (condensate) and solids (rust and other debris from storage tanks). Marine centrifuges are a economical way to remove these contaminants on a on-going basis without the need for costly filter media.

  Other related uses are for bunker fuel or HFO or diesel fuel recovery systems in fuel tank farms supplying to marine vessels. Diesel polishing centrifuges are often used in marine terminals to keep the stored fuel in clean/dry condition.

  Some advantages of using a Centrifuge:

• Longer cycle life for lube oils
• Reliable and efficient operation of engines with polished fuel
• Fewer changes of Fuel Filters
• Eliminates the need for lube oil changes

• Complete modular packages including Control Panels, HFO Heaters, Heat Exchangers, Feed Pumps, Heated Sludge Tanks and other accessories are built to customer specifications and budget.

oil purification machine

oil filtration equipment

Industrial Waste Oil Centrifuge Separator Machine For Fuel Oil Treatment Plants Images